Specification
Program:
Microprocessor controlled, capable of holding 999 program sequences which may be run independently or in selected blocks for compound windings.
Control:
Spindle drive – High torque brushless DC induction motor producing a max torque 78.5 Ncm.
Traverse – Constant current driven 4-phase stepper motor.
Index – Constant current driven 4-phase stepper motor.
Features:
The wire is fed via separate tension control units, through the spindle shaft and around a flyer guide arrangementy. the products are traversed to give layering on each spigot of the rotor, after finishing a segment the indexing angle is programmable to give control over the number of poles to wind.
Application:
Motors and Rotors, multi segment bobbins that require special wire guiding.
Package Includes:
2 x guide tube type wire feeder heads, 2 x tension units, 2 x wire feeder drums, footswitch and comprehensive manual.
Wire size:
0.03 – 0.6 mm
Maximum Pitch:
10 mm
Winding Width:
70 mm (max depth of spigot)
Core Diameter:
8-50 mm (max)
Core height:
20 mm (max)
Max speed:
3000 rpm
Power:
AC 230 / 110 V ± 10%, 50 – 60hz
Dimensions:
700 x 350 x 1000 mm
Net weight:
65kg
CE cert.
No.AE9955093 01
Click for larger image
sample coil
The WH-520 is a high speed two spindle benchtop coil winding machine with digital controller for semi-automatic operation. It is ideal for use in the production of small motors. fly winding technology enables the product to be traversed forward and back to spread the wire, (not rotating) while the wire is wound around the product.
Two spools of wire may be mounted above the machine in the supplied wire spool drums, minimising the footprint for efficient use of workshop space. Typical applications include the manufacture of rotor coils, small motors and many forms of sensor coil in medium and large batch quantities.
The digital control regulates all of the fundamental winding parameters such as winding speed, wire pitch, acceleration, braking, turns count and index angle (rotation between poles). Using the simple programming system and multi-step programs, complex windings can be generated with ease. Stored programs can be instantly recalled, reducing machine setup time for product changeover to a minimum.
